|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
|Place of Origin:||china|
Model No.: 63-160
Extruder model: SJ75/30 & SJ65/30
Forming moulds: 42 pairs of modules =84 pieces
Single Screw Extruder
Driven motor: It is main part of single screw extruder. We'd better choose good brand AC type driven motor matching with inverter
controll for saving power running cost.
Gear recuder box: It is used for connecting motor and for reducing rotating speed of screw through size and teeth of gear changing
in the gear box.
Screw and barrel: It is most important part of single screw extruder. Design of single screw is becoming to special and customzied
now due to many different kind plasic materials are using. The surface of screw should be paint double alloy for anti-wear.
Casting aluminum heater: It is used for heating barrel and screw which ensure mixed PVC/PE/PP resin material can be plasticizing and melting under the suitable temperature.
Cooling blower : It is used for cooling barrel and screw. if temperature of screw and barrel will be excess setting
temperature,cooling blowers start to work for cooling barrel which avoid PVC/PE/PP material resolved in the inside of barrel.
Hopper : It is used for keep the mixed PVC/PE/PP resin material in the silo and make sure material can be into barrel
continuously. It is like a material transport station.
Control Cabinet: It is used for control whole cornic double screw extruder running by switchs or PLC programes according to different circuits control required.
Die head and Mould
1 Material: 40Cr
2. Inner Diameter of corrubated: 7mm
3 Die head stainless steel heating ring, one heating zone
4 42 pairs of modules = 84 pieces
1. Winding inner diameter: 350mm-900mm, adjustable;
10. Take up pneumatic setting, automatic wire arrangement;
Packing & Delivery of PP PE single corrugated Pipe Extrusion Line